McCLOKSEY CRUSHER I54

 

BALAVTO LTD. IS AN AUTHORIZED DEALER FOR MCCLOSKEY CRUSHERS AND SCREENERS IN SLOVENIA AND BOSNIA & HERZEGOVINA.

 

McCloskey International Ltd. offers the complete solution for Crushing, Screening & Recycling Equipment.
From it's beginings in 1986 till today, company gained the position of one of the leading manufacturers of crushers and screeners. Today, McCloskey is very well know player in the worldwide market of crushers and screeners.  

 

McCLOSEKY I54

MAIN SPECIFICATION: 

• McCloskey I54 is one of the most productive horizontal impact crushers in the sub 50 tonne class.
• McCloskey I-54 Impactor is built around a 47" (1200mm) x 53" (1350mm) four bar impactor chamber with a 37" x 53.5" feed opening
• the 9 cubic yard hopper with 54" (1360mm) wide vibrating pan feeder feeds the crusher over an independently vibrating 4'-6" x 5'-9" double deck pre-screen - removes the majority of the fines in advance of the      crushing chamber.
• removing the fines increases capacity, reduces wear and controls product size.
• pan feeder is both larger and operates at a steeper incline than any other similar system.
• material is cleared quickly in high TPH applications, all while protecting the conveyor belt from damage.
• the I-54 is powered by a 430HP C13 ACERT CAT engine, ensuring ample power, parts availability and compliance with Tier III emissions regulations

 

MAIN ADVANTAGES OF I54

  • HOPPER:
    – large hopper with 8mm Hardox sides
    – increases durability and results in less downtime
    – wear plated pan feeder
    – potects the belt from rebar and sharp rock
    – quick feed rate
    – easily match the high production impact chamber
    – intelligent load management system
    – feed and crusher regulated by speed and level sensors, crushing pressure, crusher start / stop, main conveyor pressure, and hydraulic oil temperatur
     
  •  INDEPENDENT PRE-SCREEN
    - 4’ 6” x 5’ 9” independently vibrating screenbox – Scalps fines in advance of impact chamber, greatly decreasing wear and improving efficiency.
    - double deck pre-screen – Fines are diverted to the main belt or the side conveyor before they enter the impactor, ensuring the impactor can run at full capacity
     
  •  IMPACT CHAMBER
    - 53.3” x 32.5” feeder to impact opening – Largest opening in its class allows bigger material to be fed into the machine and eliminates some prep-work
    - universal 47” x 53” four bar impactor
    - strong 14,970 Kg impactor weight – With such a strong, heavy impactor, quality and durability are both increased dramatically.
    - hydraulic CSS Adjustment – Toggles replaced with a large hydraulic cylinder, allowing accurate CSS adjustment from the control panel, with no shims required.
    - 5' x 6'7" pan feeder clears crushed materials faster thanks to its larger size and steeper incline
     
  •  CONVEYORS 
    - adjustable main conveyor angle – Main conveyor can be raised or lowered and set to give greater clearance under belt.
    - extended 48" main conveyor as standard, giving large stockpile capacity
    - side conveyor as standard – I54 comes with side conveyor as standard, with high stockpile height and excellent clearance from machine
     
  • POWER UNIT 
    – cat C13 430HP – More horse power puts less stress on the engine, making it more fuel efficient.
    – larger fuel tank – coupled with a more fuel efficient engine means more time is available between refueling, increasing productivity
    – unrivalled easy to use interface / control panel – User Friendly, easy to navigate control panel makes the machine very easy to operate and provides excellent machine diagnostics
    – ramped start-up / shut-down – Ramped start-up and shut-down is easier on the engine, belts, drive and motor
     
  •  MAINTENANCE
    – power unit and engine access is great
    – easy access results in far less maintenance and down-time
    – all filters located in a central area - Access to all filters in one place eliminates the need to relocate equipment while performing maintenance, cutting down-time significantly
    – low sitting fuel tank – No need to climb over the machine to refuel, especially beneficial in the winter time.

MAIN TECHNICAL SPECIFICATION

TRANSPORT LENGTH

15,13 M

TRANSPORT WIDTH

3 m

TRANSPORT HEIGHT

3,57 m

WEIGHT

od 35 t (odvisno od opreme)

IMPACTOR

 

MAX FEED SIZE

600 x 500 x 500 mm

ROTOR DIAMETER

1200mm x 1335mm

HOPPER LENGHT

5374mm

HOPPER WIDTH

2642mm

HOPPER CAPACITY

10,2 m3

ENGINE

CAT C13

ENGINE POWER

320kW / 430 hp

HYDRAULIC TANK CAPACITY

1800 l

FUEL TANK CAPACITY

800 l

 

You can find aour full offer of McCloseky crucher HERE.